Home :: Control Circuit Boards and Heat Pump Controls :: White Rodgers Single-Stage HSI Integrated Furnace Control Kit 50A55-743

White Rodgers Single-Stage HSI Integrated Furnace Control Kit 50A55-743

White Rodgers Single-Stage HSI Integrated Furnace Control Kit 50A55-743
 
(0 reviews)  

White Rodgers Single-Stage HSI Integrated Furnace Control Kit 50A55-743

Replaces:
White-Rodgers 50T55-289 and 50A55-289
and Virtually All Goodman Single-Stage
HSI Controls with 120V Ignitor

Features
• 120 VAC Ignitor Output
• 120 VAC Humidifier Output
• 120 VAC Electronic Air Cleaner Output
• 120 VAC 2-Speed PSC Circulator Output
• Fuse Protection – 5 Amp
• Furnace Status LED
• Heat Fan OFF Delay (Dipswitch Selectable)
• Y, W, R, G, C, TWIN Terminals

50A55-743 Cross Reference 50A55-743 Replaces:

Goodman
0130F00005
0130F00005S
B1809926
B1809926S
PCBBF110
PCBBF110S
PCBBF112
PCBBF112S
PCBBF123
PCBBF123S

White Rodgers
50A55-289
50A55-743
50T55-289

Specifications
Electrical Ratings [@ 77°F (25°C)]
Input Voltage: 25 VAC 50/60 Hz
Max. Input Current @ 25 VAC: 0.45 amp
Relay Load Ratings
Valve Relay: 1.5 amp @ 25 VAC 50/60 Hz 0.6 pf
Ignitor Relay: 6.0 amp @ 120 VAC 50/60 Hz (resistive)
Inducer Relay: 2.2 FLA–3.5 LRA @ 120 VAC
Circulator Relay: 14.5 FLA–25.0 LRA @ 120 VAC
Flame Current Requirements
Minimum current to insure flame detection: 1 μa DC*
Maximum current for non-detection: 0.1 μa DC*
Maximum allowable leakage resistance: 100 M ohms
*Measured with a DC microammeter in the flame probe lead
Operating Temperature Range
-40° to 175°F (-40° to 80°C)
Humidity Range
5% to 93% relative humidity (non-condensing)
Mounting
Surface mount multipoise
Timing Specifications (@ 60 Hz**)
Maximum
Flame Establishing Time: 0.8 sec
Flame Failure Response Time: 2.0 sec
**At 50 Hz, all timing specifications should be increased by 20%
Gases Approved: Natural, Manufactured, Mixed,
Liquified Petroleum and LP Gas Air Mixtures are
all approved for use.

Timing Specifications
(All times are in seconds unless noted otherwise)

50A55-743

Pre-purge: 15
Ignitor warm-up: 7
(1st 64 attempts)
Minimum ignitor warm-up: 5
Maximum ignitor warm-up: 9
Ignition activation period: 2
Trial for ignition period: 4
Retries: 2 times
Valve sequence period: 12
Interpurge: 30
Post-purge 15
Lockout time 300
Heat delay to fan ON 30
Heat delay to fan OFF* 90/120/150/180
Cool delay to fan ON 5
Cool delay to fan OFF 45
Auto reset 60 minutes
Humidifier Yes
Electronic air cleaner Yes
SKU SKU18156
Weight 3.00 lbs
 
Our price: $154.00 (115.50)
 
Qty
Add to wish list
: *
: *
: *
 
 
 
35/5 MFD 370 Volt Dual ROUND Capacitor
 
45/7.5 MFD 440 Volt Dual ROUND Capacitor
 
55 MFD 440 volts OVAL Capacitor
$29.00
 
$36.00
 
$25.00
 
 
 
Nordyne Flame Sensor Kit #903600
 
208/230 Volt 1/3 - 1/2 HP Reversible, Universal Condenser Fan Motor
 
Mars Brand 1/6 - 1/3 HP 2 Speed 825 RPM Condenser Fan Motor # 10469
$22.00
 
$125.00
 
$108.92
 
 
 
AprilAire model 2000 Universal seal kit 4725
 
Bryant Carrier EZ Flex Model EXPXXFIL0016 16" X 25"
 
RBM Type 84 and 184 Switching Relays 90-292Q
$30.00
 
$31.00
 
$25.94
There have been no reviews