Home :: Gas Heating Repair limits,switches, draft motors :: Plenum Thermostats SHL 516

Plenum Thermostats SHL 516

Plenum Thermostats SHL 516
(0 reviews)  

Thermostats open when temperature in the furnace plenum area is too high Shuts down furnace until the temperature cools to an acceptable level.
The number one reason I have seen over the years for the switch to go bad is failure is due to poor maintenance.
The problem will be short cycling of the furnace as the switch open and closes all the time. It will cause the switch to wear out sooner. Cycling all the time.
If your having problems here reaplace your furnace filter First.
I know and have heard hundreds of time its said on the filter it's good for 3 months.
But lots of conditions must be met first befroe the filter would last that long.

Length 3.12"
Board Width 1.88"
Temp. °F Close 170
Temp. °F Open 210
Board Height 2.94"
Mfg. # SHL516
Weight 1.00 lbs
Our price: $29.00 (21.75)
Add to wish list
: *
: *
: *
Type the characters you see in the picture:

Rheem Ruud 47-21776-86 Defrost Control Board
York S1-33102956000 Hot Surface Ignition Single Stage Control Board Kit Replaced with S1-3310301000
Nordyne Control Board 903106
Bryant Carrier ½ HP BLOWER MOTOR HC43AE115 HC43AE115A
American Standard Trane High Limit Switch SWT 01259
American Standard Trane Heat Pump Defrost Circuit Board CNT02938
Motor Mounting Kit
30/4 MFD 370 Volt Dual ROUND Capacitor
3 MFD 370 volts OVAL Capacitor
There have been no reviews