Home :: Ignition Upgrade kits and Ignition Module :: White Rodgers Single Stage/ HSI Integrated / Furnace Control Kit 50M56U-843

White Rodgers Single Stage/ HSI Integrated / Furnace Control Kit 50M56U-843

White Rodgers Single Stage/ HSI Integrated / Furnace Control Kit 50M56U-843
 
(0 reviews)  

White Rodgers Single Stage/ HSI Integrated / Furnace Control Kit 50M56U-843

Replaces:

• More OEM Boards Than Competitive Models
Because 50M56U-843 Can Be Used on Both
80V and 120V Ignitor Applications
• Carrier HK42FZ004, HK42FZ007, HK42FZ008,
HK42FZ009, HK42FZ011 and HK42FZ016
Fast-Install Kit – includes everything you
need for quick and accurate replacement:
• Ignition Control Module – 50M56-843
• 12 Quick-Select/Quick-Connect Wiring Harnesses
• Universal Nitride Ignitor Kit – 21D64-2
• Installation Instructions and OEM Cross-Reference

Features
• 3 Fan Speeds – Cool, Low Heat & High Heat Speeds
(Terminal Connections)
• Color-Coded (Labeled) Thermostat Connection –
For Quick Helpful Selection
• System Diagnostics, with Fault Recall (Stored)
• Cover Label – Displays Diagnostic Table
• Red LED Light – Used for Diagnostic Flash Codes
• Low Voltage – Fuse Protection –
3A Replaceable Automotive Type
• Humidifier & Electronic Air Cleaner Connections
(Optional)

Specifications

Electrical Rating [@ 77°F (25°C)]
Input Voltage: 25 VAC 50/60 Hz
Max. Input Current @ 25 VAC: 0.45 amp
Relay Load Ratings: Valve Relay:
1.5 amp @ 25 VAC 50/60 Hz 0.6 pf
Ignitor Relay: 6.0 amp @ 120 VAC 50/60 Hz (resistive)
Inducer Relay: 2.2 FLA–3.5 LRA @ 120 VAC
Circulator Relay: 14.5 FLA–25.0 LRA @ 120 VAC
Flame Current Requirements
Minimum current to insure flame detection: 1 μa DC*
Maximum current for non-detection: 0.1 μa DC*
Maximum allowable leakage resistance: 100 M ohms
*Measured with a DC microammeter in the flame probe lead
Operating Temperature Range
-40° to 176°F (-40° to 80°C)
Mounting
Surface mount multipoise
Timing Specifications (@ 60 Hz)
Maximum
Flame Establishing Time: 0.8 sec
Flame Failure Response Time: 2.0 sec
Gases Approved: Natural, Manufactured, Mixed,
Liquified Petroleum, and LP Gas-Air Mixtures are
all approved for use.
Relay Load Rating
Main Valve Relay: 1.5A @ 25 VAC 60 Hz
Hot Surface Ignition
120 VAC


Notes:
OEM furnace models abbreviated to shorten the length. Reference the control board P/N
for proper replacement.
*If existing furnace circuit board has 2 green lights and NO amber light (furnace date code 3294
or earlier), an additional Flame Sensor Kit (Rheem Part 62-24044-71) may be required.
‡50M56U-843 will not replace HK42FZ013 or control boards with an 11-pin bar connector.
N/A = Not Available
Important: 21D64-2 Ignitor Note –
In these applications, the existing 80V ignitor must be replaced by the 120V 21D64-2 ignitor.
Notes:
OEM furnace models abbreviated to shorten the length. Reference the control board P/N
for proper replacement.
*If existing furnace circuit board has 2 green lights and NO amber light (furnace date code 3294
or earlier), an additional Flame Sensor Kit (Rheem Part 62-24044-71) may be required.
‡50M56U-843 will not replace HK42FZ013 or control boards with an 11-pin bar connector.
N/A = Not Available
Important: 21D64-2 Ignitor Note –
In these applications, the existing 80V ignitor must be replaced by the 120V 21D64-2 ignitor.

SKU SKU18157
Weight 4.00 lbs
 
Our price: $181.00 (135.75)
 
Qty
Add to wish list
: *
: *
: *
Type the characters you see in the picture:


*
 
 
Bryant - Carrier KFAFK0312LRG Fan Coil Filters (Hog-Hair)
 
Goodman/Amana Circuit Board PCBBF132S
 
RHEEM RUUD WEATHERKING OEM PART 62-25341-81
$26.00
 
$90.00
 
$200.00
 
 
 
SureSwitch Universal Electronic Compressor Contactor Upgrade 49P11-843
 
ICP Heil Comfortmaker Kenmore Tempstar Draft Inducer 1013833
 
Protech Rheem Ruud 51-23017-42 - 1/4 thru 3/4 HP 120V 1075 RPM
$60.00
 
$125.00
 
$165.00
 
 
 
ICP Circuit Board 1183394 CEPL131004-01Superceded part # 1184594
 
Goodman Amana Furnace Hot Surface Ignitor 0230K00001 Conversion kit
 
2 MFD 370 volts OVAL Capacitor
$130.00
 
$45.00
 
$8.00
There have been no reviews